In the app, tap the map editing icon, select Add new zone, then choose Add via manual control or Add via map editing. Click here to learn more.
-
The pathway should be flat and wider than 60 cm. A bridge should be wider than 150 cm. Walk behind the robot during remote-control setup.
-
Set the start and end points at least 1 m away from the boundary. The pathway must lead from the mapped area to the unmapped area. This means that the starting point of the pathway is in a mapped area and the endpoint is in an unmapped area.
-
Note: If the robot remains in localization mode and does not proceed to mapping, this could be due to the following reasons:a.Location has not yet been successfully completed (please wait a few minutes).b.The lighting conditions are insufficient.c.The robot is on very sparse grass, which makes localization difficult.