Decide when to store your TerraMow based on your local climate. We recommend storing it once the average daytime temperature falls below 5°C (41°F).

1. Preparation

1. Turn off the currently scheduled tasks on the TerraMow App.
2. Charge your TerraMow to at least 85% to prevent over-discharge.
   
   
   
3. Prepare cleaning tools and dismantling tools for later steps.
   

2. Clean TerraMow and Dismantle the Blades

1. Switch off the main power button of TerraMow.
   
   
   
2. Clean the outer case and chassis with a soft brush.
   *Keep clear of the blades.
   
   
   
3. Wash clean with a water hose.
   *Do not use a high-pressure hose.
   
   
   *Do not wash the axle of the front wheel (omni wheel).
   
   
   *Do not wash the TerraVision panel.
   
   
   
4. Wipe away the remaining water.
   
   
   
5. Wipe clean the water spots and dirt on the TerraVision panel and the rain-detect sensor.
   *Please use a soft clean tissue.
   
   
   
   
6. Dry TerraMow in the sun.
   
   
   
7. Remove the blades with gloves before storage.
   *Sharp blades, and handle with care.
   *Properly dispose of the used blades.
   

3. Dismantle and Clean the Base Station & Garage Kit

1. Disconnect the power adapter.
   
   
   
2. Disconnect the extension cable.
   
   
   
3. Clean the garage kit and the base station with a soft brush.
   *Do not use hard or sharp tools for cleaning.
   
   
   
4. Clean the QR code maker and charging pin.
   *Please use a soft clean tissue when cleaning.
   
   
   
5. Remove 8 fixing screws on the base station with the hex key.
   
   
   
6. Take away the base station.
   
7. Remove 4 fixing screws of the garage kit.
   
8. Remove the garage kit.
   

4. Packing and Storage

1. Packing and bagging is recommended.
   
   
   
2. Put TerraMow, base station, and accessories back to the box.
   
   
   
3. Store the box indoors in a cool, dry place without direct sunlight, extreme temperatures, and heat sources.